Now families are customizing furniture, and some families will choose solid wood when choosing board. So where should I check when the customization of solid wood furniture ends? Let's have a look with the solid wood furniture factory.
1、 Judge whether the furniture is really made of solid wood, or indicate where it is solid wood and where it is man-made board.
2、 Observe the wood for defects
The main stress-bearing parts of furniture, such as columns and load-bearing bars near the ground between connecting columns, shall not have large knots, cracks and cracks. The structure shall be firm, the frame shall not be loose, and tenon and material cutting are not allowed. Do not buy the "three families and one set" of sawing, nailing and painting particleboard; Don't buy furniture made of "three noes" drawers with no mess, no tenon and no belt at the bottom. The wood-based panel components used on the furniture shall be edge sealed, and there shall be no missing parts, missing nails and through nails in the installation of various accessories.
3、 Observe the advantages and disadvantages of wood
Open the furniture cabinet door and drawer, and observe whether the wood is dry and white, and whether the texture is tight and delicate. If the furniture made of particleboard, density board and one-time molding board is used, it is required that there shall be no pungent smell after opening the cabinet door or drawer.
4、 Observe the plate surface strength
The board surface can be stressed by pressing with your fingers to feel the fastness of the board surface. One side of the material shall be fixed with a well shaped fixed frame. If the skeleton is sparse, it will feel empty and untrue when pressing the surface, and the panel vibrates greatly; The drawer bottom plate shall be pressed by hand to test the strength. Generally, the bottom of the partition plate is mostly made of laminates, and the partition plate with large area shall be made of five laminates. Cabinet doors and drawer switches shall be flexible. When the panel is covered with veneer and other materials, the color shall be similar to that of the complete set of products, and the paint film on the surface of the product shall not be wrinkled, sticky or leaked.
When Jinan solid wood furniture factory finishes work, it is necessary to check whether it is really made of solid wood, observe the advantages and disadvantages of wood, observe whether there are defects in wood, observe the strength of board surface, etc.